Close Quarters Handgun Tactics

I’ve had some questions lately about some of the close quarters battle (CQB) techniques that I describe in my online novel, The Union Creek Journal.  Specifically, one reader wanted to know about the technique that David utilized on Marta in Add These to the List when he encountered her in the abandoned farm house – a strike to the bridge of the nose with the trigger guard of his Glock 20.

Glock pistols, as well as pistols made by several other manufacturers, have a small point on the forward section of the trigger guard.  As I wrote in The Union Creek Journal, I’m not sure of the original intended purpose for this portion of the trigger guard but it is very effective when utilized on pressure points or other sensitive areas in CQB.  In the photo below, I’ve circled the specific area to which I am referring.

Point on a Glock 20 Trigger Guard

You’ll find similar points on most “battle” pistols – those designed to be utilized by military, para-military or law enforcement.  The photos below show a Beretta 92FS and a Springfield XDm.  Both have a point similar to the Glock.  Both can be utilized in a similar fashion.

Beretta 92FS Trigger Guard

Springfield XDm Trigger Guard

Let’s discuss why one might utilize these tactics before we get into the details of how one might utilize these techniques.

CQB is an ugly thing.  If you’re in a close-quarters fight, you’re probably fighting for your life.  If you have a handgun, you have a better chance against an assailant who may have superior strength but that handgun is useless if it’s taken away from you.  It’s of very little use if your assailant is close enough that they can push it aside or knock it from your hands.

One of the primary purposes of a strike in CQB is to create distance.  Generally, one’s ability to retain one’s handgun is directly related to one’s distance from one’s assailant.  A strike to the bridge of the nose is highly likely to distract your assailant and allow you to back away.  The space created when you back away from your assailant is precious distance that increases your chances of retaining your firearm.

Retention of your firearm in a close-quarters fight, is the number one way to survive.

In The Union Creek Journal, David utilizes the trigger guard of his Glock to smash Marta’s nose as she attacks him.  The nose is certainly a prime target for such a tactic.  With the exception of trained fighters, most people will reflexively “tear-up”, i.e. get tears in their eyes, when they are punched in the nose.  Punch someone in the nose with the point of your pistol’s trigger guard and all but the toughest assailants will hesitate, if only for a moment.  Some will end up completely debilitated.

That hesitation gives you time to separate, create distance, retain your weapon and, perhaps, escape without having to shoot someone.  Any day that you don’t have to shoot someone is a good day.  If you are unable to escape, you have put yourself in a more advantageous position to protect yourself.  Ultimately, only you can make the shoot/no-shoot decision.

So, how is this tactic utilized?

It has to be said … when practicing this tactic, as with any time you handle firearms, SAFETY FIRST!

Before you practice:

  1. Know and follow the Four Basic Rules of firearms safety
  2. Unload your weapon and set all ammunition aside in a safe area
  3. If you have not already done so, remove your weapon’s magazine
  4. Lock your weapon’s slide to the rear and visually & physically inspect the chamber to ensure that it is empty
  5. For added safety, you may want to practice this technique with your weapon’s slide locked to the rear or you may wish to field strip your weapon and practice with only the frame

To deploy this tactic, you should start with a good, firm grip on your pistol.  The web of your hand, between your thumb and forefinger, should be high up under the tail of your gun’s frame (see photos below).  I prefer to index my trigger finger along the weapon’s slide when drilling this tactic to avoid an accidental discharge.

CQB Pistol Strike Grip (Support Hand)

CQB Pistol Strike Grip (Shooting Hand)

Basic CQB Strike Drill

  1. Assume a Low Ready position
  2. Ensure that your trigger finger is outside of the trigger guard and indexed along the slide of the weapon
  3. Rotate grip of weapon upward to the strong side while rotating the barrel of the weapon to the support side; weapon should be roughly parallel to the ground and the trigger guard should be on line with the assailant’s face
  4. Move support hand to top of weapon’s slide placing the thumb on the under-side of the weapon and the fingers on the top-side of the weapon
  5. Step forward with your strong-side foot and smash the trigger guard into the bridge of your assailant’s nose with both hands; strike as if you were attempting to smash your assailant’s nose out through the back of his skull
  6. Immediately step backward three or four steps while returning your weapon to Low Ready
  7. If your assailant is disabled, scan 360 degrees for additional assailants

This technique is not limited to a strike to the nose nor is it limited to utilizing only the trigger guard of your weapon.  Striking an assailant’s eye socket with the barrel of a pistol can also be effective.  The larynx is another vulnerable area that can yield debilitating results when struck with any hard object.

A note about pistol-whipping, as often seen in movies and on television.  Pistol-whipping requires a wide swing which leaves you open to a counter attack.  A savvy assailant will step inside of the wide swing, potentially rendering it ineffective and opening you up to greater danger.  Keep your hands and arms up in front of you, protecting your vital areas as you strike.  Strike quickly and return your hands and arms to a protective position immediately.

As you become more comfortable with this technique, you may wish to integrate it into live fire exercises.  Obviously, such exercises come with inherent risk.  The practice is valuable.  You must determine if its benefit outweighs the risk.  If you are a novice shooter, I highly recommend that you seek out professional training and supervision before integrating techniques like the one described above into your live fire routines.

You may also want to seek out specific training in close-quarters battle or hand-to-hand combat with firearms.

Plan | Prepare

Disclaimer: The preceding is neither legal advice nor advice to utilize these specific tactics in any given situation.  Only you can decide when and how to defend yourself.  Furthermore, you must accept responsibility for your safety and the safety of others should you choose to practice the tactics described above.

Advertisements

Bedding a Rifle Scope

A how-to on bedding a rifle scope is a bit of an odd first post for our Defenses category but it happens to be timely.  I recently purchased a new long-range rifle and I’m getting ready to install my first one-piece scope base.  So, I’ve been doing a bit of research on the best way to fit a one-piece mount to a Remington 700.  If you’re not aware, the 700’s are somewhat notorious for relatively poor receiver tolerances making one-piece mounts more difficult to install.

For my installation, I’ve chosen the Badger Ordnance 20 MOA base pictured below.

Badger Ordnance 20 MOA Base

Frequently, you’ll end up with vertical stringing in your groups if you install a one-piece base without proper bedding.  You’ll also place unnecessary stress on your rifle’s receiver as well as the mount.

Not every base will need to be bedded.  How do you know if yours does?  How do you know which end needs to be bedded, if not both ends?

Determining Whether Bedding is Required

  1. Place the scope base on top of your rifle’s receiver
  2. Tighten the screw(s) on only one end of the base (do not over-tighten)
  3. Utilizing a .001″ feeler gauge (pictured below) check for a gap on the loose end of the base
  4. If the feeler gauge slides under the base, you have a gap that needs to be bedded
  5. If no gap is identified on the first end of the base, repeat Steps 1-4 for the opposite end of the base
  6. The end of the base with the gap needs to be bedded.

    Feeler Gauge

Once you have determined whether or not your scope base needs to be bedded, the bedding process is fairly straight-forward.

Bedding a Scope Base

  1. Thoroughly clean the under-side of your scope base and top of your rifle action with an acetone or alcohol-soaked cloth (I prefer a lint-free cloth to avoid leaving any fibers behind after cleaning)
  2. Do not touch these surfaces with your bare hands once you have cleaned them (you may want to use Nitrile gloves for the rest of the process)
  3. Apply a liberal coating of release agent to the scope base mounting screws
  4. Mix the appropriate amount of bedding compound according to the manufacturer’s directions
  5. Insert all of the scope base mounting screws into their corresponding holes in the rifle’s action; tighten 1/4 turn
  6. Apply a thin layer of bedding compound to the under-side of your scope base and around the screws in your rifle’s receiver (any excess will be cleaned off in a later step)
  7. Remove the screws from the rifle’s receiver
  8. Place the scope base, with the bedding compound on it, on top of your rifle’s receiver and begin to tighten the two center screws
  9. Tighten the two center screws until the base appears to be in contact with the rifle’s receiver (you can utilize the feeler gauge again to ensure contact; do not over-tighten the screws)
  10. Tighten the outer two screws until they make contact with the scope base (the torque of the inner and outer screws should be the same at this point)
  11. Wipe off any excess bedding compound with a clean cloth
  12. Clean up any excess residue with acetone-soaked cloths or Q-tips
  13. Bedding compound may continue to seep from under the scope base for an hour or two; be prepared to repeat Step 12 as it does so
  14. Once the seeping stops, set the rifle aside and allow the bedding compound to cure according to the manufacturer’s instructions
  15. After the bedding compound has cured, torque all four screws to the manufacturer’s specifications and go shoot your rifle!

Plan | Prepare